KT200 R/W BMW Bosch MEVD17.2.5 via OBD or on Bench?

Used KT200 ECU Programmer to read/write Bosch MEVD17.2.5 via OBD, get the error show as below.

KT200 read/write Bosch MEVD17.2.5 on Bench:
Never use KT200 read/write BMW F and G Chassis on OBD, only on Bench or Boot. Even flex has problems via obd. Programming goes thru a gateway…not safe. I always try to do it all on bench or bdm, Ecu remove normally takes 10 mins.Bench is safe for BMW and make full read.

Or, sometimes I do a obd read and wile I’m modifying the file y do a backup on bench.

Please Connect the multifunction cable as follows:

To read/write BOSCH MEVD17.2.5 [ 1797 ] – BMW [Gasoline] by following driver:
→ BENCH TRICORE
→ BMW
→ TC1797 – BMW
→ MEVD17.2.5

Alright, this article shows how to use ECUHELP KT200 read/write BOSCH MEVD17.2.5 [ 1797 ] – BMW [Gasoline] perfect on Bench. Hope it helps.