KTflash & J2534 Interface Read/Write ECU SID321 on Bench
In today’s tutorial, we demonstrate how to use ECUHELP KTflash with a J2534 Interface to successfully read and write the ECU SID321 on bench. Tools & Devices Required: KTflash dongle…
KTflash BMW MEVD 17.2.9: Read/Write, DTC OFF & IMMO OFF
Today, we’re sharing a successful case of using ECUHELP KTflash together with a J2534 interface to read and write a BMW MEVD 17.2.9 ECU, and perform DTC OFF and IMMO…
Unlock Bosch M7.8 ECU on Bench with ECUHELP KTflash
Today, we’ll walk through a successful bench operation to unlock, read, and write to the Bosch M7.8 ECU using the ECUHELP KTflash, PCM Tool, and KTprog. Tools & Equipment Used:…
Ecuhelp KT200 Read and Write BMW ZF8HP via OBD no problem
Great news for BMW tuners and transmission specialists: the ECUHELP KT200 has been successfully tested on BMW ZF8HP gearboxes via OBD with no problems, and the vehicle started perfectly afterward.…
Buy advice: KT200II Offline, KT200 Offline, KTAG 10.10, or Foxflash Offline?
If you’re searching for a reliable ECU programmer clone and trying to decide among KT200II Offline, KT200 Offline, KTAG 10.10 (Reworked CP2010), or Foxflash Offline, this guide sums up user…
ECUHELP KT200II Read Write Siemens MSV80 Boot Mode
ECUHELP KT200II is confirmed to read/write Siemens MSV80 Boot Mode. KT200II wiring diagram of SIEMENS MSV80 Vers.1 [ TC1796 INT.F.] – BMW First of all you need to check which…
ECUHELP KT200II R/W Peugeot 3008 MD1CS003 on Bench
Another great achievement with the ECUHELP KT200II ECU Programmer! Today’s highlight features a successful bench mode read/write on a Peugeot 3008 equipped with the MD1CS003 ECU. Success Summary: Vehicle: Peugeot…
ECUHELP KT200II OBD Write DAF Delphi ETC3 DMCI
One ECU tuner feedback: Daf Delphi ETC3 Dmci read/write/checksum ok First read file with foxflash but I can’t write back..(software shut down during writing procedure). Second try with ECUHELP Kt200ii…
Fix KT200II Failed OBD R/W Seat 1.8tsi dsg 2015 Simos 12
This article starts with one user’s feedback: What’s wrong i try stage1 to seat 1.8tsi dsg 2015 Simos 12…with ECUHELP kt200 everything goes fine, almost done then it says some…
KT200II Won’t Open After a Break Here’s What Fixed It
ECUHELP KT200II User feedback: I haven’t used my laptop for 14 days, and now when I try to connect to the KT200II, it won’t open. I checked the dfb2xx.dll file,…