Ecuhelp KT200II is tested ok to read/write sid 310 Navarra Nissan 2.3 dci 2018 boot mode and cks by tool.

Image 1 shows KT200II will finish writing sid 310 until 100%.

Image 2 shows how does KT200II is connected to the ECU boot mode.

In details, KT200II wiring diagram of SIEMENS SID310 [ TC1791 INT.F.] – Renault, Nissan, Mercedes:
Kit to use:
– Multifunction cable
– OBD Cable (to search password on car)

PASSWORD SEARCH
To find the password, connect via OBD to the car.
Use the driver:
→ TOOLS BOOT MODE
→ INFINEON TRICORE Tool Password
→ OBD PASSWORD SID310
RENAULT – NISSAN – MERCEDES
→ Click on “Find Password” and follow the
software messages.

For some models the password can also be found on the desk by connecting the following pinout.

Now that the password has been found it’s possible to read and write the control unit. See next step.

READ AND WRITE ECU with KT200II ECU Programmer
Connect with the multifunction cable the following pinout and the boot shown below.
Use the driver:
→ TOOLS BOOT MODE
→ INFINEON TRICORE Boot
→ SAK TC1791