Hyundai SantaFe 2008 2.2 edc16c39, read and write ok, checksum correction ok Bench mode with ECUHELP KT200II ECU Programmer.

Look at the following image which shows how does KT200II is connected to the ECU edc16c39
on Bench, and to read and write 100% ok, checksum ok.

In detail, please refer to the KT200II wiring diagram of BOSCH EDC16 C39 [ MPC561/2 ]
Fiat, Alfa Romeo, Lancia, Hyundai, Iveco, Kia, Marine, PSA, GM, Opel, Saab [Diesel]
Connect the multifunction cable as follows, use the Bench Box. For this ECU there are 5 different types of hardware versions, try the following 5 combinations in series. The ECU will not suffer any damage during connection tests.

Use KT200II to read and write use the following driver:
→ BENCH MODE
→ [brand]
→ MPC561/2 – [brand]
→ EDC16 C39