ECUHELP KT200II ECU Programmer is tested successfully on BMW Mini MEVD17.2.7 TC1797, read/write on bench, checksum ok.
Use:
– Multifunction cable
– Bench Box V.2
Connect the multi-function cable as follows. For this ECU there are 2 different types of hardware versions, try the following 2 combinations in series. The ECU will not suffer any damage during connection tests.
To read and write use the following driver:
→ BENCH MODE
→ BMW/MINI
→ TC1797 – BMW
→ MEVD17.2.7
Image 1: read MEVD17.2.7 100% ok with KT200II.
Image 2-3: write MEVD17.2.7 100% ok with KT200II.
