The ECUHELP KT200 II ECU Programmer is confirmed to successfully program the SID310 ECU of a Nissan Navarra 2.3 dCi 160 2017 for reading, writing boot mode, and doing checksum by the tool.

Connection Guide: Image 1 demonstrates how the KT200 II is connected to the SID310 ECU in Boot mode.

Writing 100% ok: Image 2 Demonstrates the 100% writing process with the KT200 II.

Wiring Diagram for SIEMENS SID310 [TC1791 INT.F.] – Renault, Nissan, Mercedes
Kit to Use:
Multifunction Cable
OBD Cable (to search for the password on the car)

PASSWORD SEARCH:
To find the password, connect via OBD to the car.

Use the driver:
→ TOOLS BOOT MODE
→ INFINEON TRICORE Tool Password
→ OBD PASSWORD SID310
RENAULT – NISSAN – MERCEDES
→ Click on “Find Password” and follow the software messages

For some models, the password can also be found on the desk by connecting the following pinout.

Now that the password has been found it’s possible to read and write the control unit. See next step.

READ AND WRITE ECU:

Connect with the multifunction cable the following pinout and the boot shown below.
Use the driver:
→ TOOLS BOOT MODE
→ INFINEON TRICORE Boot
→ SAK TC1791

Conclusion:
The KT200 II ECU Programmer is a highly effective tool for programming the SID310 ECU in the Nissan Navarra 2.3 dCi 160 2017 model. By following the provided wiring diagrams and driver instructions, users can efficiently perform read, write, and checksum operations in Boot mode. The tool’s ability to find and use passwords via OBD connection or on the desk further enhances its versatility and reliability.