ECUHELP KT200II / KT200 ECU Programmer is tested to read/write BMW MSV70 BDM Mode without any problem.

How do you use KT200 to read/write BMW Siemens MSV70 BDM mode?
Kit to use:
-Multifunction cable
-Siemens/Marelli adapter
-Grey flat cable
-Connectors dip/sip

Connect the multifunction cable as follows:

Solder the dip/sip connectors on the PCB and do a link:

Insert Siemens/Marelli adapter (or MSV adapter)as in photo:

KT200 reads and writes using the following driver:
-> BDM/JTAG Mode
-> BDM MPC
->MPC55x/56x

How do you use KT200II to read/write BMW Siemens MSV70BDM mode?
Kit to use:
– Multifunction cable
– Color flat cable

Connect the multi-function cable as follows the JTAG flat as shown:

To read and write use the following driver:
→ BDM/ JTAG MODE
→ BDM MPC
→ MPC55x/56x

Alternatively, connect Siemens adapter. Use:
– Multifunction cable
– Siemens adapter
– Grey flat cable
– Connectors dip/sip

Solder the dip/sip connectors on the pcb and do a link:

Insert Siemens adapter as in the photo:

KT200II read and write use the following driver:
→ BDM / JTAG MODE
→ BDM MPC
→ MPC 55x/56x