KT200 Read and Write Mercedes MD1CP001 on Bench

Byadmin

May 14, 2024 ECUHELP KT200 Reviews

The KT200 ECU Programmer has been validated for its capability to read and write the Mercedes MD1CP001 ECU successfully on bench. This article provides a comprehensive visual guide and detailed instructions to assist users in utilizing the KT200 for ECU programming tasks.

ECU Model: Mercedes MD1CP001
Tool: KT200 ECU Programmer

Visual Documentation and Setup Guide:
Image 1: Displays the Mercedes MD1CP001 ECU, providing a clear view of what the ECU looks like.
KT200 Read and Write Mercedes MD1CP001 on Bench-01

Image 2: Shows how the multifunctional cable is connected to the Mercedes MD1CP001 ECU, illustrating the initial setup for programming.
KT200 Read and Write Mercedes MD1CP001 on Bench-02

Images 3-4: Document the process of using the KT200 to write to the Mercedes MD1CP001. These images capture the active programming phase.
KT200 Read and Write Mercedes MD1CP001 on Bench-03

Please refer to the KT200 II wiring diagram of BOSCH MD1CP001 / MRD1 [SPC5777] – Mercedes [Diesel]
Use:
– Multifunction cable
– Bench Box V.2
– Laboratory power supply or battery

Connect the multifunction cable as follows:
KT200 Read and Write Mercedes MD1CP001 on Bench-05

Use KT200 to read and write use the following driver:
→ BENCH MODE
→ MERCEDES
→ SPC5777 – MERCEDES
→ MD1CP001

Conclusion:
The KT200 ECU Programmer offers a robust solution for handling the Mercedes MD1CP001 ECU, showcasing its proficiency in both reading and writing operations. By following the detailed guidelines and using the correct setup as demonstrated in the visual aids, users can efficiently perform ECU programming tasks.

By the way, the KT200 has been upgraded to KT200 II and it’s working great! You can update yours now by just paying for the PCB board here:
Upgrade to ECUHELP KT200 II