KT200 ECU Programmer is confirmed perfect reading and writing EDC7C32 on Man TGX 18.440 E5.

Users have shared several tips for effective use:
1. Start by backing up with the bench and then read/write EDC7C32 via OBD. The same MPC works on Bench.

2.KT200 reads and writes E5 EDC7C32 without any issues.

3. I can read/write EDC7C32 by using this specific setup.

4.KT200 read/write E5 EDC7C32 on Bench is easy and fast. No problems at all.
5. One user reported successfully using KT200 read and write via OBD for Man E6 twice.

Alright, for connecting KT200 to Man TGX 18.440 E5 EDC7C32, follow these steps using the multifunction cable and Bench Box with D48CONN04 adapters:

Use the following driver for reading and writing:
->BENCH MODE
->MAN
->MPC561/2 – MAN
->EDC7 C32

In conclusion, ECUHELP KT200 is confirmed to be perfectly capable of reading and writing EDC7C32 on Man TGX 18.440 E5.