ECUHELP KT200 is tested to read/write EDC16CP31 on Bench without an extra adapter like FC200 (r/w EDC16CP31 with one extra new adapter).

Look at the ECU Bosch EDC16CP31 (0281 013 514).

Connect the cable by following the manual in the KT200 software.

Let’s prepare on Bench read/write Bosch EDC16CP31 with KT200.

Turn on the dashboard light.

Select Driver -> Bench Mode -> Mercedes -> MPC563/4 -edc16cp31- OK.
BTY, if you click on “Info”, there will be a wiring diagram to follow.

Click on “Connect” and start data reading, wait until it runs to 100%.

Click on “Read all” and select the file, then read 100%.

Click on “Write all” and select the file, then write 100%.

Last but not least, please do checksum manually by Winols/Lsuite/Davinci.

Alright, this is the procedure of using KT200 to read/write EDC16CP31 on Bench. You see KT200 is a cost-effective tool to own.