The KT200 II ECU Programmer is confirmed to read and write the KIA Sportage 2016 ECU Bosch EDC17C57 on Bench. Below are the detailed steps, wiring diagrams, and necessary drivers for successful operation.

Reading ECU Bosch EDC17C57 on Bench

Connection: Images 2-4 show how the KT200 II is connected to the ECU and the Bench box. The setup uses the KT200 II offline dongle.

Wiring Diagram for BOSCH EDC17 C57 [1793] – Hyundai, Kia [Diesel]

Kit to Use:
Multifunction Cable

KT200 II read and write EDC17 C57 using the following driver:
→ BENCH TRICORE
→ HYUNDAI / KIA
→ TC1793 – HYUNDAI KIA
→ EDC17 C57

Attention:
Some EDC17C57 enter in Bench mode with the white wire on Pin 90. If with the previous pinout doesn’t go in bench tricore mode, then try again by connecting it as follows:

Conclusion:
The KT200 II ECU Programmer is highly effective for reading and writing the Bosch EDC17C57 ECU of a 2016 KIA Sportage Bench mode. By following the provided wiring diagrams and driver instructions, users can ensure a reliable connection and operation. If the initial pinout fails, the alternative setup for Pin 90 should be utilized to enter Bench mode successfully.