KT200 II Read and Write Iveco 2019 EDC17C69 on Bench

Byadmin

May 28, 2024 KT200II Test Reports

The ECUHELP KT200 II has been confirmed to successfully read and write the Iveco 2019 EDC17C69 ECU on bench.

Proof of Functionality:
Image 1: KT200 II writing Iveco 2019 EDC17C69, achieving 100% success.
KT200 II Read and Write Iveco 2019 EDC17C69 on Bench-01

Image 2: Connection setup of KT200 II to EDC17C69.
KT200 II Read and Write Iveco 2019 EDC17C69 on Bench-02

Connection Instructions:
To connect KT200 II to the EDC17C69, refer to the wiring diagram for BOSCH EDC17 C69 [1793] applicable to Fiat, Alfa Romeo, Lancia, Jeep, and Iveco [Diesel].

Use:
– Multifunction cable
– Bench Box V.2

Connect the multi-function cable as follows. For this ECU there are 5 different types of hardware versions, try the following 5 combinations in series. The ECU will not suffer any damage during connection tests.
KT200 II Read and Write Iveco 2019 EDC17C69 on Bench-03

Attention for IVECO:
If none of the previous 4 modes allows bench mode communication, connect as in the following photo using the D48CONN04 connector:
KT200 II Read and Write Iveco 2019 EDC17C69 on Bench-05

To read and write use the following driver:
→ BENCH MODE
→ [brand]
→ TC1793 – FCA
→ EDC17 C69

Conclusion:
The ECUHELP KT200 II is a reliable tool for working with the Iveco 2019 EDC17C69 ECU on bench. By following the proper connection instructions and using the correct driver settings, you can ensure successful read and write operations.