We are pleased to confirm that ECUHELP KT200 ECU Programmer is fully compatible with the CONTINENTAL Temic PLD Euro 3/4/5 [Diesel] ECU in Mercedes Benz trucks. By following the provided guidelines, you can ensure a seamless operation when utilizing the KT200 ECU Programmer.

Here’s a step-by-step procedure to assist you:

Familiarize yourself with the CONTINENTAL Temic Mercedes Truck Euro 3/4/5 ECU.

Connect the ECU to the truck’s control unit using the OBD cable. However, please take note of the following special consideration:
ATTENTION: In some trucks, the key lock don’t reset only the +12V of ignition, but it switches off the entire ECU. In these cases it is necessary to connect as follows.
(Refer to the next page for details)

Procedure:
Once the connections are properly established, power up the ECUHELP KT200 2023 software using a +24V battery. Then, select the appropriate driver:
→ E3/E4/E5 ECU TEMIC FULL SYSTEM

 One user Feedback:
Temic pld euro 5
ID confirmation successful, but unable to read the ECU.
Tested using both the OBD cable on the table and Bench box

To optimize your experience, please consider the following helpful tips:

1. The secure and working method is to follow this wiring diagram to connect.

2. Keep in mind that reading and writing the Temic PLD can be challenging. Pay attention to this aspect during the process.

3. It is Full system read.
4. Additionally, for your reference: to ignition by having one extra switch (from MPC red to switch); as for the switching operations (not use MPC red switch), someone tested it 100% ok.

Conclusion:

By adhering to these guidelines, you can confidently leverage ECUHELP KT200 ECU Programmer to effectively read and write the CONTINENTAL Temic PLD Euro 3/4/5 [Diesel] ECU in Mercedes Benz trucks.