ECUHELP KT200 Full version can be used to read and write ECU Marelli 6LPx 6lp 6kpb [ST10F280/ST10F296] Peugeot Citroen [Gasoline] 100% OK.

Here are the steps:
Prepare a multifunction cable and a 560 Ω resistor.

Connect the multifunction cable and the resistor as shown in the diagram.
In the ECUHELP KT200 software, go to Tools > Boot Mode > ST ST10Fxxx > ST10F280 or ST10F296.
Click Read or Write to read or write the ECU’s firmware.

User feedback:
I used ECUHELP KT200 Full version to read and write ECU Marelli 6LPx 6lp 6kpb [ST10F280/ST10F296] Peugeot Citroen [Gasoline] 100% OK. The procedure was very easy to follow and the software worked flawlessly. I would definitely recommend ECUHELP KT200 to anyone who needs to read or write ECUs.

I hope this is helpful! Let me know if you have any other questions.

https://www.ecuhelpshop.com/
WhatsApp: + 8618205996549