ECUHELPshop Official Blog

ECUHELP KT200II, KT200, TagFlash, KTFlash, ECU Bench Tool, IO Prog etc

ECUHELP KT200II R/W Peugeot 3008 MD1CS003 on Bench

Another great achievement with the ECUHELP KT200II ECU Programmer! Today’s highlight features a successful bench mode read/write on a Peugeot 3008 equipped with the MD1CS003 ECU. Success Summary: Vehicle: Peugeot…

ECUHELP KT200II OBD Write DAF Delphi ETC3 DMCI

One ECU tuner feedback: Daf Delphi ETC3 Dmci read/write/checksum ok First read file with foxflash but I can’t write back..(software shut down during writing procedure). Second try with ECUHELP Kt200ii…

Fix KT200II Failed OBD R/W Seat 1.8tsi dsg 2015 Simos 12

This article starts with one user’s feedback: What’s wrong i try stage1 to seat 1.8tsi dsg 2015 Simos 12…with ECUHELP kt200 everything goes fine, almost done then it says some…

KT200II Won’t Open After a Break Here’s What Fixed It

ECUHELP KT200II User feedback: I haven’t used my laptop for 14 days, and now when I try to connect to the KT200II, it won’t open. I checked the dfb2xx.dll file,…

How to Write ME2.1 with ECUHELP KT200 Bench Mode?

If you’re working with Bosch ME2.1 ECUs, you may have noticed that the KT200 software officially supports writing only via OBD. However, one user has successfully managed to write to…

KT200II R/W Renault Kangoo 2020 MD1CS006 on Bench

ECUHELP KT200II is a good ECU Programmer, it is tested to work with Renault Kangoo 1.5 Blue dci 80ch 2020 ECU MD1CS006, Read 3 minutes ok, Write 1.4 minutes ok…

ECUHELP KT200II R/W Seat Ibiza 1.2 TDI DCM 3.7 via OBD

ECUHELP KT200II ECU Programmer is confirmed to successfully read and write the Seat Ibiza 1.2 TDI ECU DCM 3.7 via OBD. Read DCM 3.7 via OBD 100% ok: KT200II handles…

ECUHELP KT200II vs KT200 vs FoxFlash vs KT200Plus

One of the most frequently asked questions among automotive tuning professionals is: Which tool is better: ECUHELP KT200II, KT200, FoxFlash, or KT200Plus? Below is a structured comparison based on official…

ECUHELP KT200II read write DCM7.1B PSA Boot Mode

ECUHELP KT200II ECU Programmer is tested 100% ok to read/write DCM7.1B PSA Boot Mode. Kit to use: – Multifunction cable – Bench Box V.2 READ AND WRITE ECU: With the…

edc17c49 Fiat ducato clone calculator with ECUHELP KT200II

This post is about how to use ECUHELP KT200II to clone a calculator for edc17c49 Fiat ducato. Simple instruction: It’s easy. Read flash and eprom from original ecu and save…