ECUHELP KT200II test report:
Peugeot boxer 2.2hdi
Sid208
Password in obd
R/W in boot mode (security )
Egr off dpf off
Chks
Note:
Do not look for the password file it is automatically saved in the folder where you will put your flash and eeprom reading there will be a small file named password.

KT200II Wiring Diagram of SIEMENS CONTINENTAL SID208 [ TC1797 INT.F.] – Peugeot,Citroen

Kit to use:
– Multifunction cable

PASSWORD SEARCH:
Connect the pinout below with multifunction cable.
Use the driver:
→ TOOLS BOOT MODE
→ INFINEON TRICORE Tool Password
→ OBD PASSWORD SID208 PSA
→ Click on “Find Password” and follow the software messages.
Attention: On some SID208 PSA you can find the password only via OBD.

Now that the password has been found it’s possible to read and write the control unit.

READ AND WRITE ECU:
Connect with the multifunction cable the following pinout and the boot shown below.
Use the driver:
→ TOOLS BOOT MODE
→ INFINEON TRICORE Boot
→ SAK TC1797

Below is an alternative boot method for tools with firmware < D070: