ECUHELP KT200II Feedback:
Car: Peugeot Boxer 2019 2.0 BlueHDI
ECU: DCM6.2C
Boot Read flash okay
Read Eeprom okay
Write flash okay
checksum by the tool ok
Read time flash 23min
Write time flash 28min
Tip: When reading the EEPROM, add the .bin extension to the file name because it won’t read, it will just display a message “REMOVE AND GIVE POWER TO ECU BEFORE CONTINUING! “ again and again.
Wiring diagram for DELPHI DCM6.2 A/C – Peugeot, Citroen, Toyota [ SPC5674 ]:
Connect with the multifunction cable the following pinout and the CNF1 signal on the pcb.
Use the driver:
→ TOOLS BOOT MODE
→ MOTOROLA FREESCALE BAM
→ PSA DELPHI DCM6.2A/C
Some user feedback: always use ECUHELP KT200II to R/W PSA DCM6.2C through OBD2 and without any problem.