ECUHELP KT200II ECU Programmer has been verified to successfully Bench read and write the EDC17C50 ECU on a BMW Tourer Serie 2. This article provides a comprehensive guide on using the KT200II for this task, detailing the connection process, hardware versions, and necessary drivers.

Connection Setup:
Connect the multi-function cable as follows. For this ECU there are 3 different types of hardware versions, try the following 3 combinations in series. The ECU will not
suffer any damage during connection tests.

Read and Write Process:
To read and write the EDC17C50 ECU, use the following driver settings in the KT200II software:
→ BENCH TRICORE
→ BMW
→ TC1797 – BMW
→ EDC17 C50

Reading the EDC17C50 ECU:
Once the connections are established and the correct drivers are selected, proceed with reading the ECU:

Writing to the EDC17C50 ECU:
After reading, proceed with writing to the ECU:

Conclusion:
ECUHELP KT200II is a reliable and effective ECU Programmer for reading and writing the EDC17C50 ECU on a BMW Tourer Serie 2.