ECUHELP KT200II R/W Ms6.3 iveco dayli Edc17c84 on bench

Byadmin

Mar 13, 2025 KT200II Test Reports

ECUHELP KT200II user feedback: Ms6.3 Iveco dayli bench with obd protocol x2 vehicle R/W/Cks OK, Edc17c84 on bench R/W/Cks OK.

Connect the multifunction cable as follows:
ECUHELP KT200II R/W Ms6.3 iveco dayli Edc17c84 on bench-01

ECUHELP KT200II R/W Ms6.3 iveco dayli Edc17c84 on bench-02

Use KT200II to read and write use the following driver:
→ BENCH TRICORE
→ RENAULT or NISSAN
→ TC1782 – RENAULT
→ EDC17 C84
ECUHELP KT200II R/W Ms6.3 iveco dayli Edc17c84 on bench-03

ATTENTION:
Some EDC17C84 enter in Bench mode with the white and brown wires on pins F4 and G4. If the previous pinout doesn’t enter in bench tricore mode, then try again by connecting it as follows:
ECUHELP KT200II R/W Ms6.3 iveco dayli Edc17c84 on bench-04