ECUHELP KT200 has been successfully tested for reading and writing Man TGX 18.440 E5 EDC7C32 via OBD.
KT200 Connection Guide for Man TGX 18.440 E5 EDC7C32:
Connect the multifunction cable as follows, use the Bench
Box and the D48CONN04 adapters:
Then, To read and write use the following driver:
→ BENCH MODE
→ MAN
→ MPC561/2 – MAN
→ EDC7 C32
User Tips and Experiences:
1. Backup First: Backup with bench, then read/write EDC7C32 via OBD. Same MPC on bench.
2. I had to use this set up
3. Bench is easy and faster for KT200 R/W E5 EDC7C32. No problems at all.
4. I was writing Man E6 two times, and I read and wrote ok via obd.