Bench Read and write Citroën C4 1.6hdi EDC17C10 with KT200 II

Byadmin

Oct 7, 2024 KT200II Test Reports

ECUHELP KT200II Offline Workstation is confirmed to read/write Citroën C4 1.6hdi EDC17C10 on Bench, EGR OFF ok, car soft landing after the checksum (exceeding 10min).
KT200II read write Citroën C4 1.6hdi EDC17C10 on Bench
-01

KT200II read write Citroën C4 1.6hdi EDC17C10 on Bench-02

KT200II read write Citroën C4 1.6hdi EDC17C10 on Bench-03

KT200 II wiring diagram of BOSCH EDC17 C10 [ 1797 ] – Peugeot, Citroen, Fiat [Diesel]
Connect the multifunction cable as follows:
KT200II read write Citroën C4 1.6hdi EDC17C10 on Bench-04

Use KT200 II to read and write use the following driver:
→ BENCH TRICORE
→ PEUGEOT/CITROEN or FIAT
→ TC1797 – PSA or FCA
→ EDC17 C10

To sum up
ECUHELP KT200II Offline Workstation is a reliable ECU tool for working with the Citroën C4 1.6 HDi EDC17C10 ECU, providing a stable process for reading and writing. This ensures effective customization or tuning, including advanced functions such as EGR OFF, and demonstrates its compatibility with Peugeot, Citroën, and Fiat vehicles equipped with the TC1797 microcontroller.