ECU Bench Tool has successfully demonstrated its compatibility with Bosch MD1/MG1. Today, we’ve explored its performance with VAG Bosch MG1CS001, and the results were positive.
Q: Is the ECU Bench Tool effective in reading and writing Bosch MD1/MG1?
A: Absolutely. The tool is efficient with Bosch MD(G)1, especially those based on the Motorola MPC5777 / Aurix TC2xx microprocessor.

Procedure:
Step 1:
The ECU Bench Tool comprises two significant parts:
ECUHelp 3.0: Utilized for checking the wiring diagram and downloading VR/damos files.
AMT service software: Implemented to read and write ECUs.
Initiate by checking the MG1CS001 wiring diagram within the ECUHelp 3.0 application.

Proceed to connect the MG1 ECU to the ECU Bench Tool, strictly adhering to the aforementioned wiring diagram.
Refer to Images below for a clearer connection overview.

Step 2:
Start the EBT device software.
Choose the appropriate hardware, specifically Bosch MG1 SPC 5777.
Identify the ID and post its recognition, extract the flash data.

Step 3.
Read the Micro data.
Securely save the obtained data.
For a comprehensive understanding, refer to Images below.

Step 4.
Read the eeprom data.
Ensure the data is safely stored.
Detailed steps can be viewed in Images below.

Following these systematic steps will ensure a seamless reading and writing experience with VAG Bosch MG1CS001 using ECU Bench Tool.