KT200II R/W Chevrolet spark 1.0 Continental D52 Boot Mode

Byadmin

Apr 15, 2025 KT200II Test Reports

ECUHELP KT200II ECU Programmer Feedback:
Car model: Chevrolet spark 1.0
Ecu: Continental D52
Read and write Boot mode
Checksum by kt200II

Connect the multifunction cable as follows:
KT200II R/W Chevrolet spark 1.0 Continental D52 Boot Mode-01

KT200II reads and writes use the following driver:
→ TOOLS BOOT MODE
→ SIEMENS-INFINEON C167
→ Siemens VDO 29F200/29F400BB CRIPT
KT200II R/W Chevrolet spark 1.0 Continental D52 Boot Mode-03

Attention:
If the ECU doesn’t enter boot mode, proceed as follows:
→ Switch off the ECU and remove the grey wire.
→ Connect directly to ground the boot pin with a needle.
→ Switch on the ECU.
→ Remove the ground.
→ Launch the driver and click the read / write buttons.

This article shows that ECUHELP KT200II is safe and efficient to read/write/checksum Chevrolet spark 1.0 Continental D52 Boot Mode. Any questions, please browse
https://www.ecuhelpshop.com/ and message WhatsApp: + 8618205996549.