KT 200 PLUS bench mode R/W Dcm6.2V skoda octavia 1.6tdi 2017

Byadmin

Apr 2, 2025 KT200 Plus Test Report

ECUHELP KT 200 Plus feedback:
Car/year: Skoda octavia 1.6tdi 2017
ECU: Dcm6.2V
R/W bench mode ok
Read ~ 30min
Write ~ 10min
Checksum by tool
With 14.4V power (there is 12v connector on the multifunction cable for kt200 plus, so I didn’t apply the volts with the external power supply to all the ECU combs)
PS: I had a problem reading VR with kt200 II ( it gave me the file that was not VR ) . Then switched to kt 200 plus and did it on bench without problems.

Here are three images illustrating the KT200 Plus connection to the ECU DCM6.2V on Bench, the 100% reading result, and the wiring diagram.
KT 200 PLUS bench mode R/W Dcm6.2V skoda octavia 1.6tdi 2017-01

Someone has one question: Can I use the KTflash dongle with the KT200 II? I got the KT200II, and I found the KTflash dongle with it, I didn’t know what to do with it.

ECUHELPshop answer: ECUHELP KTFlash Software Dongle, used with j2534 hardware (PCMTuner, PCM Tool, Scanmatik, K-T-M Tool etc).

Note: KT200 Plus = KTflash dongle + J2534 Hardware + all the licenses activated free for one year.