TagFlash is a powerful ECU Programmer that enables the reading and programming of engine control units (ECUs) for various cars, trucks, motorcycles, tractor, Marine worldwide  It reads and writes EEPROM and flash memory of ECUs in the mode of OBD, on Bench, Boot mode, BDM, and Jtag systems.

What ECU modules can TagFlash actually read and write? Read the following users’ feedback:

Delco Hybrid – Opel: via OBD Read/Write/Checksum OK

Bosch EDC17C60 – PSA: OBD – R/W/CS/Tprot – OK

Read and Write Hyundai SIM2K341 ok.

For now, seams stable and decent built tool. Software stable online/offline. (Windows 10 x64)
More protocols that KT200, more Bench, full, OBD full without Open ECU, and it’s great.
Had to put something on the back of the Bench box, so that don’t bend the conection. For now, well worth it.

Read and write modified files edc17C60 by obd and bench ok

Read ems 3120 and 3125 yes.

Bosch EDC17C64 on Bench – R/W/CS – OK

Reading DCM2.7AP in Boot mode ok.

Read MEG17.9.21 ok.

TagFlash Read Write MD1CS089 (2021-05-15) Bench Mode.

TagFlash will read/write more ECU than KT200: for example, Delco E84, md1cs018, dcm2.7ap by removing ECU, sid208-sid209 on Bench, dcm7.1b via obd, dcm6.2v via OBD.

Read Write Delphi DCM3.7AP OK.

Edc16u1 Read write bench ok with TagFlash.

TagFlash Read Write MD1CS089 on Bench， MD1CS089 (2021-05-15) Bench Mode ok.

Read Write MD1 MG1 SPC5777 on Bench.

Read Write 76F0038AGD Jtag Mode.

Read Write MD1CS089 (2021-05-15) Bench Mode

Read Truck MCM2.1 ECU No Problem.

TagFlash Read Write dcm6.2v vag boot mode for cloning ok.

… To be continued.

Read related topic: KT200 or TagFlash advice.