ECUHELP KT200II ECU Programmer is confirmed to read/write / checksum DSG DQ250 02e Passat b6 2011 bench mode, Read flash ok, Read eeprom ok and Write flash ok. Look at…

Today we use ECUHELP KT Flash to read and write EDC16C39 data on bench,  and do DTC Off. 1. Take out the dongle with the protocol enabled (ECU/Bosch EDC16/ME9-series Module…

ECUHELP KT200II ECU Programmer is confirmed to program BMW-320d F30 EDC17C50, R/W BENCH MODE,Cks perfectly by KT200II. Look at the following images of using KT200II to connect EDC17C50 on bench…

ECUHELP KT200II user question: Opel AC Delco E98 Full system reading was ok But during writing at around 30% kt200ii stopped Now can’t even make id With Voltage: 13.8 –…

ECUHELP KT200II user feedback: read Ford ME9.9 MPC5612 okay, but when writing it, got message “ERROR TEST EMPTY” shown as the following image. Possible reason and solution: There is something…

ECUHELP KT200II ECU Programmer Feedback: Car model: Chevrolet spark 1.0 Ecu: Continental D52 Read and write Boot mode Checksum by kt200II Connect the multifunction cable as follows: KT200II reads and…

ECUHELP KT200II ECU Programmer is tested to read/write Maserati levante 3.0 EDC17C79 on Bench, Checksum by kt2002 no problem. Connect the multifunction cable as follows: KT200II reads and writes use…

ECUHELP KT200II ECU Programmer is confirmed to work with BMW 740d 2009 EDC17CP09, R/W ok, chks ok. Bench mode. Connect the multifunction cable as follows: KT200II reads and writes using…

ECUHELP KT200II Feedback: already read/write a few Audi A4 Edc17c74 but never happened before, Now it goes but stuck on 87%. Restarted the computer, kt200ii worked, but was very unreliable.…

ECUHELP KT200II is confirmed to read/write the Audi Q3 2020 edc17c74 on bench, and the checksum is ok too. Image 1 displays how the KT200II is connected to edc17c74 on…