ECUHELP KT200II ECU Programmer is confirmed to read/write BMW MG1CS003 on bench, using 12.2V power supply, and checksum by KT200II.
Refer to the KT200II wiring diagram for BOSCH MG1CS003 [ SPC5777] – BMW [Gasoline]
Required Tools:
– KT200II Multifunction cable
– Bench Box V.2
– Laboratory power supply or battery
Connect the multifunction cable as follows:
Below are real images showing KT200II connected to BMW MG1CS003 on Bench:
Use KT200II to read and write use the following driver:
→ BENCH MODE
→ BMW
→ SPC5777 – BMW
→ MG1CS003
All right, the KT200II can successfully read, write, and checksum the BMW MG1CS003 on the bench.