Expanding the capabilities of the ECUHELP KT200 is as simple as connecting an extra HTprog clone adapter. Doing so will allow the KT200 to clone thousands of ECU types on…

Starting with a user’s inquiry, he asks whether it is possible to read acm 2.1 using the ECUHELP KT200 ECU programmer. He attempted to do so but was unsuccessful. The…

ECUHELP KT200 is able to clone some VAG ECU and a little part of BMW / Mini ECU, while for more ECU cloning, it needs to connect one extra HTprog…

ECUHELP KT200 is an ECU Programmer capable of reading and writing Flash & EEPROM on Bench, via OBD, and in BDM & JTAG for more than 5400 ECU and over…

ECUHELP KT200 Offline Workstation is able to read and write ECU and TCU for Car Truck Motorbike Tractor Boat on Bench, via OBD, in Boot, in BDM / JTAG in…

This post focuses on the resemblances and distinctions among the ECUHELP KT200 Full Version, Auto Version, and Offline Workstation. To begin, kindly refer to the following comparative chart: ECUHELP KT200…

ECUHELP KT200 ECU Programmer Test Reports and Reviews. All you want to learn are included in this article. ECUHELP KT200 write Fiat MARELLI 6F3 via OBD ECUHELP KT200 read write…

As a beginner ECU tuner, How to choose the right ECU programmer? As a beginner ECU tuner, choosing the right ECU programmer can be a daunting task. Here are a…

When using PCMTuner V1.2.7 to read and write ECU, you may encounter the following questions: Is the ECU compatible with PCMTuner V1.2.7 software? Do you have the correct communication interface,…

ECU Bench Tool EDC16 EDC17 MED17, I have a problem while reading. “S1 and S2 pinout error”. The solution of resetting the device does not work. Any other ideas?   PSA Group…