KT200 Volvo V60 D4 2014 Denso MB279700-9611 Pinout Mode
ECUHELP KT200 V1 Offline ECU Programmer is confirmed to work with Volvo V60 D4 2014 Denso MB279700-9611 Pinout Mode, Read 17minm, unlock 10sec,write 9min and checksum by tool. Reading and…
How to fix KT200II MG1CS011 ERROR SK2 – Bench Locked
User feedback: used ECUHELP KT200II to write MG1CS011, got message “ERROR SK2 – Bench Locked”, shown as the following image. Solution: This ECU is newer than 2020/06 and locked, so…
KT200II Read ME7.5 Audi TT 1.8 Petrol in Full System Mode
ECUHELP KT200II ECU Programmer has been successfully tested to read and write Bosch ME7.5 from an Audi TT 1.8L Petrol Full System Mode. Below is the image of the ME7.5…
KTflash read/write Nissan SH705507N Kline on Bench
ECUHELP KTFLASH is confirmed to support read and write operations for the Nissan SH705507N Kline ECU (used in Patrol 4.8L TB48 models) in both Bench mode and OBD mode. The…
KTflash Delphi MT22U Reading, Writing, DTC OFF & IMMO OFF
ECUHELP KTFLASH is confirmed to work with Delphi MT22U, perform reading, writing, DTC OFF, and IMMO OFF on Bench. Tools to use: KTflash software dongle One J2534 Interface One computer…
ECUHELP KT200II Read/Write VW Simos9.1 boot mode
ECUHELP KT200II ECU Programmer has been successfully tested to read and write VW Simos9.1 ECUs using boot mode. ECU Model Overview Before starting, take a close look at the Simos9.1…
ECUHELP KT200II Read Write BMW MG1CS003 on Bench
ECUHELP KT200II ECU Programmer is confirmed to read/write BMW MG1CS003 on bench, using 12.2V power supply, and checksum by KT200II. Refer to the KT200II wiring diagram for BOSCH MG1CS003 […
KT200II & KT200 Plus R/W BMW 318D 2020 MD1CS001 on Bench
KT200II & KT200 Plus test report: BMW 318D 2020 ECU: MD1CS001 Read/write on Bench Demo Images : 1.KT 200 Plus MD1CS001 Bench Option Menu: Functions available: Wiring diagram inquiry, read…
Fixed! KT200II Read Med17.1.1 error “Detected different Micro”?
User feedback: Used ECUHELP KT200II to Read Benzin Med17.1.1, got the error message “Detected different Micro – Select Correct Driver”. Possible reason and solution: There are two possible processors for…
How to fix KTflash Exx Series module does not write/blocked?
One user ECUHELP feedback: After testing KTflash Exx Series module these are the results: -E39 Reading ok, writing ok -E39A Reading ok, writing no, blocked -E37 does not read, does…