ECUHELPshop Official Blog

ECUHELP KT200II, KT200, TagFlash, KTFlash, ECU Bench Tool, IO Prog etc

KT200II

  • Home
  • KT200II Read/Write Volvo XC60 Denso MB279700 96xx on Bench

KT200II Read/Write Volvo XC60 Denso MB279700 96xx on Bench

ECUHELP KT200II has been successfully tested for reading and writing the Volvo XC60 Denso MB279700 96xx ECU on bench, with checksum verification confirmed as working. Testing Details: Online Mode: Works…

KT200 II Read Write VW Sharan 2012 2.0 TSI MED17.5.2 on Bench

ECUHELP KT200 II has been successfully tested for reading and writing the Volkswagen Sharan 2012 with the 2.0 TSI engine, equipped with the MED17.5.2 ECU. The process also confirms that…

KT200 II Read and Write Audi TT 1.8T MED17.5 on Bench

ECUHELP KT200 II ECU Programmer has been successfully tested for reading and writing the Audi TT 1.8T MED17.5 ECU on the bench without any issues. To connect the device properly,…

KT200 II Read and Write Renault Scenic EDC16CP33 2.0 DCI on Bench

ECUHELP KT200 II ECU Programmer has been successfully tested for reading and writing the Renault Scenic EDC16CP33 2.0 DCI ECU on bench. The entire process takes approximately 1 minute and…

KT200 II Read and Write Clio III 2011 DELPHI DCM 3.4 via OBD

The KT200 II ECU Programmer has been confirmed to read and write the DELPHI DCM 3.4 ECU on the Clio III 2011 K9K-770 1.5 DCi 88 Bhp model via OBD.…

KT200 II Read/Write Mahindra EDC17C53 on Bench

ECUHELP KT200 II ECU Programmer has been successfully tested for read and write operations on the Mahindra EDC17C53 ECU when using a bench setup. Below are the steps to perform…

KT200 II Read/Write FAW MD1CE100 on Bench

The ECUHELP KT200 II ECU Programmer has been successfully tested for read and write operations on the FAW MD1CE100 ECU using a bench setup. The process requires specific equipment and…

KT2000 II Read and Write Isuzu D-max 2017 EDC17C83 on Bench

ECUHELP KT200 II ECU Programmer is confirmed to successfully read and write the Isuzu D-max 2017 EDC17C83 ECU bench mode, with checksum verification passing without issues. Connection Setup: To begin,…

KT200II Read Write Audi tt BOSCH MED9.1 [ MPC561/2 ] on Bench

The KT200II ECU Programmer has been successfully confirmed to read and write the Audi TT BOSCH MED9.1 [MPC561/2] ECU (2 protocol available) on Bench. Step-by-Step Instructions: 1. Connection Setup: Connect…

ECUHELP KT200II Read / Write C4 Picasso SID803A via OBD

ECUHELP KT200II has been successfully tested for reading and writing the C4 Picasso SID803A engine control unit (ECU) via the OBD (On-Board Diagnostics) port. Reading Process In the first step,…