ECUHELP KT200II ECU Programmer has been successfully tested to read and write the Mercedes-Benz E220D 2016 ECU MD1CP001 in Bench mode. The operation is completed smoothly with checksum correction supported by the tool.
To perform the bench read/write operation, prepare the following tools:
– Multifunction cable
– Bench Box V.2
– Laboratory power supply or battery
Connect the KT200II multifunction cable as follows:
After completing the wiring, open the KT200II software and select the following driver path:
→ BENCH MODE
→ MERCEDES
→ SPC5777 – MERCEDES
→ MD1CP001
