ECUHELPshop Official Blog

ECUHELP KT200II, KT200, TagFlash, KTFlash, ECU Bench Tool, IO Prog etc

KT200II Test Reports

  • Home
  • How do you know if a PSA MD1CS003 ECU is Locked?

How do you know if a PSA MD1CS003 ECU is Locked?

Start this post with one question: Can the Alientech Kess3 read and write a 2021 Citroën Berlingo with a Bosch MD1CS003 ECU? Yes! You can safely read it in bench…

ECUHELP KT200II Read Write EDC17C53 Kia Carens 1.7 crdi 2013 on Bench

ECUHELP KT200II is a good ECU programmer for Kia Carens 1.7 crdi 2013. Hyundai i40 1.7 crdi 2014 Ecu EDC17C53, it can read/write ok, checksum ok on bench. Connect the…

ECUHELP KT200II R/W Mercedes Temic ECU E3 E4 E5 Pinout Mode

ECUHELP KT200II ECU Programmer has been successfully tested for reading and writing Mercedes-Benz Temic ECU E3, E4, and E5 in Pinout Mode. Step 1: Connect KT200II to Temic ECU (Pinout…

ECUHELP KT200II Bench Read/Write for Audi EDC17CP20

ECUHELP KT200II is a powerful ECU chip tuning tool, successfully tested for reading and writing Audi EDC17CP20 on Bench. BTY, KT200 Plus can read and write + immo off on…

OBD Read and write DCM 7.1B using ECUHELP KT200II

Peugeot Boxer Delphi DCM7.1B *CAN Read ok, Write ok, via obd. Using ECUHELP KT200II The following image displays the KT200 II can write Delphi DCM7.1B via obd 100% ok. Alternative…

Need KT200 Plus When I Have ECUHELP KT200II?

This article answers a frequently asked question: Do I need KT200 Plus when I already have ECUHELP KT200II ECU Programmer? The short answer is yes. Below, we explain the differences…

Read/Write MED17.7.5 Mercedes G63 2019 with KT200II

This guide demonstrates how to use the ECUHELP KT200II ECU programmer to read and write the MED17.7.5 ECU found in the 2019 Mercedes G63 AMG on bench. Step 1: Connect…

ECUHELP KT200II Read and Write Iveco Edc17cp52 on bench

ECUHELP KT200II ECU programmer has been successfully tested for reading and writing the Iveco EDC17CP52 ECU in bench mode. This guide provides a step-by-step process to ensure a smooth and…

ECUHELP KT200 R/W Bosch MS6.3 Renault Master Pinout Mode

ECUHELP KT200 ECU Programmer has been successfully tested for reading and writing the Bosch MS6.3 Pinout Mode on Renault Master vehicles. While it’s possible to use this setup on the…

ECUHELP KT200II Offline R/W Audi a3 1,6 tdi. EDC17c64 on Bench

Audi a3 1,6 tdi. EDC 17c64 Read write on bench ok Using ECUHELP Kt200 2 offline Dtc Off the customer didn’t want a fap Off he just wanted dtc Dtc…