ECUHELP KT200II Read Write BMW MG1CS003 on Bench
ECUHELP KT200II ECU Programmer is confirmed to read/write BMW MG1CS003 on bench, using 12.2V power supply, and checksum by KT200II. Refer to the KT200II wiring diagram for BOSCH MG1CS003 […
KT200II & KT200 Plus R/W BMW 318D 2020 MD1CS001 on Bench
KT200II & KT200 Plus test report: BMW 318D 2020 ECU: MD1CS001 Read/write on Bench Demo Images : 1.KT 200 Plus MD1CS001 Bench Option Menu: Functions available: Wiring diagram inquiry, read…
Fixed! KT200II Read Med17.1.1 error “Detected different Micro”?
User feedback: Used ECUHELP KT200II to Read Benzin Med17.1.1, got the error message “Detected different Micro – Select Correct Driver”. Possible reason and solution: There are two possible processors for…
KT200II OBD R/W Subaru Forester 2.0 TD 147HP 2014 ECU DENSO
ECUHELP KT200II Test Report: Vehicle: Subaru Forester Engine: 2.0 TD, 147 HP Model Year: 2014 ECU Type: DENSO Operation Mode: OBD Result: Read and write completed successfully without any issues.…
ECUHELP KT200II Read/Write Suzuki Bosch EDC16C3 via BDM Mode
ECUHELP KT200II User Feedback: Using the ECUHELP KT200II ECU Programmer, reading and writing the Bosch EDC16C3 ECU on a 2008 Suzuki Grand Vitara was successfully done via BDM mode. Initial…
KT200 V2 R/W Hyundai MB275700-57XX RENESAS SH72546 on Bench
If you’re working on a Denso Hyundai/Kia ECU (39199-4ADN0, MB275700-57XX with RENESAS SH72546), the ECUHELP KT200 V2 ECU Programmer is a reliable tool to perform both reading and writing in…
KT200II Read/Write ECU Fiat IAW 5SF9.B3 in Full System Mode
ECUHELP KT200II ECU Programmer has been successfully tested for reading and writing the Fiat IAW 5SF9.B3 ECU full system mode. The operation includes automatic checksum correction by the tool. Required…
Fixed! KT200 asks for a bench box but bench box is connected
Question:use ECUHELP KT200 to read/write ECU Mercedes Benz EDC16CP31, it ask for a bench box but bench box is connected. I’m doing this ecu at least one per week. Possible…
ECUHELP KT200II Read/Write Fiat Ducato IAW 9DF Full System Mode
If you’re working on a Fiat Ducato with a Marelli IAW 9DF ECU, the ECUHELP KT200II ECU Programmer offers full support for reading and writing in full system mode. Image…
Buy advice: KT200II Offline, KT200 Offline, KTAG 10.10, or Foxflash Offline?
If you’re searching for a reliable ECU programmer clone and trying to decide among KT200II Offline, KT200 Offline, KTAG 10.10 (Reworked CP2010), or Foxflash Offline, this guide sums up user…