ECUHELPshop Official Blog

ECUHELP KT200II ECU Programmer is tested for reading/writing Mercedes MCM2 Pinout Mode. To connect to the control unit use: – Cable DFB D48CBB03 – Laboratory power supply or battery Alternatively,…

ECUHELP KT200II gets the error “Splash” (shown below). Possible reason and solution: 1. Synchronization clock in pc, before starting the program. 2. It is a server issue, it looks like…

ECUHELP KT200II ECU Programmer has been successfully tested for both reading and writing the Peugeot 308 1.6 HDI via the OBD port. Reading Peugeot 308 1.6 via OBD Using the…

ECUHELP KTflash updated on July: added Medc17 series ECUs and have DTC removal,immo off function for using. KTflash Medc17 series coverage:  

ECUHELP KT200 ECU Programmer has been tested and confirmed to read and write the PEUGEOT EXPERT 2.0 DIESEL SID803A via the OBD (On-Board Diagnostics) port, including checksum verification by the…

ECUHELP KT200II ECU Programmer is a versatile tool that supports reading and writing SID807EVO boot mode effectively. In this blog post, we will guide you through the process of using…

MEVD17.2.9 bmw Bench mode The ECUHELP kt200 stops at 38% writing! Possible reason and solution: 1. check file and checksum go to write ori file. 2.14v and check pinout or…

ECUHELP KT200II ECU Programmer has been verified to successfully Bench read and write the EDC17C50 ECU on a BMW Tourer Serie 2. This article provides a comprehensive guide on using…

ECUHELP KT200II ECU Programmer is confirmed to read and write Citroen C5 1.6 Hdi Edc16c34 on Bench. Image of using KT200II to write Citroen C5 1.6 Hdi on Bench. Please…

This article provides a comprehensive overview of using the KT200 for tronic Mercedes VGS3 TCU coding Pinout mode. This image demonstrates the KT200 in action, coding a tronic Mercedes VGS3…