ECUHELP KT200II ECU Programmer is tested 100% ok to read/write DCM7.1B PSA Boot Mode. Kit to use: – Multifunction cable – Bench Box V.2 READ AND WRITE ECU: With the…

This post is about how to use ECUHELP KT200II to clone a calculator for edc17c49 Fiat ducato. Simple instruction: It’s easy. Read flash and eprom from original ecu and save…

If you’re working with a Citroen EDC17C60 ECU and encounter the “ERROR Unlock Password” message when trying to write Bench mode using the ECUHELP KT200II, don’t worry—this guide will walk…

ECUHELP KT200II ECU Programmer is confirmed to read/write / checksum DSG DQ250 02e Passat b6 2011 bench mode, Read flash ok, Read eeprom ok and Write flash ok. Look at…

Today we use ECUHELP KT Flash to read and write EDC16C39 data on bench,  and do DTC Off. 1. Take out the dongle with the protocol enabled (ECU/Bosch EDC16/ME9-series Module…

ECUHELP KT200II ECU Programmer is confirmed to program BMW-320d F30 EDC17C50, R/W BENCH MODE,Cks perfectly by KT200II. Look at the following images of using KT200II to connect EDC17C50 on bench…

ECUHELP KT200II user question: Opel AC Delco E98 Full system reading was ok But during writing at around 30% kt200ii stopped Now can’t even make id With Voltage: 13.8 –…

ECUHELP KT200II user feedback: read Ford ME9.9 MPC5612 okay, but when writing it, got message “ERROR TEST EMPTY” shown as the following image. Possible reason and solution: There is something…

ECUHELP KT200II ECU Programmer Feedback: Car model: Chevrolet spark 1.0 Ecu: Continental D52 Read and write Boot mode Checksum by kt200II Connect the multifunction cable as follows: KT200II reads and…

ECUHELP KT200II ECU Programmer is tested to read/write Maserati levante 3.0 EDC17C79 on Bench, Checksum by kt2002 no problem. Connect the multifunction cable as follows: KT200II reads and writes use…