KT200 II Read and Write Audi TT 1.8T MED17.5 on Bench
ECUHELP KT200 II ECU Programmer has been successfully tested for reading and writing the Audi TT 1.8T MED17.5 ECU on the bench without any issues. To connect the device properly,…
KT200 II Read and Write Renault Scenic EDC16CP33 2.0 DCI on Bench
ECUHELP KT200 II ECU Programmer has been successfully tested for reading and writing the Renault Scenic EDC16CP33 2.0 DCI ECU on bench. The entire process takes approximately 1 minute and…
KT200 II Read and Write Clio III 2011 DELPHI DCM 3.4 via OBD
The KT200 II ECU Programmer has been confirmed to read and write the DELPHI DCM 3.4 ECU on the Clio III 2011 K9K-770 1.5 DCi 88 Bhp model via OBD.…
KT200 II Read/Write Mahindra EDC17C53 on Bench
ECUHELP KT200 II ECU Programmer has been successfully tested for read and write operations on the Mahindra EDC17C53 ECU when using a bench setup. Below are the steps to perform…
KT200 II Read/Write FAW MD1CE100 on Bench
The ECUHELP KT200 II ECU Programmer has been successfully tested for read and write operations on the FAW MD1CE100 ECU using a bench setup. The process requires specific equipment and…
KT2000 II Read and Write Isuzu D-max 2017 EDC17C83 on Bench
ECUHELP KT200 II ECU Programmer is confirmed to successfully read and write the Isuzu D-max 2017 EDC17C83 ECU bench mode, with checksum verification passing without issues. Connection Setup: To begin,…
KT200II Read Write Audi tt BOSCH MED9.1 [ MPC561/2 ] on Bench
The KT200II ECU Programmer has been successfully confirmed to read and write the Audi TT BOSCH MED9.1 [MPC561/2] ECU (2 protocol available) on Bench. Step-by-Step Instructions: 1. Connection Setup: Connect…
ECUHELP KT200II Read / Write C4 Picasso SID803A via OBD
ECUHELP KT200II has been successfully tested for reading and writing the C4 Picasso SID803A engine control unit (ECU) via the OBD (On-Board Diagnostics) port. Reading Process In the first step,…
ECUHELP KT200II Read Write BMW 116d E87 EDC17C06 via OBD
ECUHELP KT200II Read Write BMW 116d E87 EDC17C06 via OBD ECUHELP KT200II has been thoroughly tested and proven effective in programming the BMW 116d E87 EDC17C06 ECU. The process includes…
KT200 II read write BMW edc17cp02 Boot mode
BMW edc17cp02, read on bench OK with KT200II ECU Programmer, write in bench planter at 18%, Pick up in boot to se edc17cp02. Boot mode: KT200II Wiring diagram of BOSCH…