KTflash R/W Nissan SH705519 on Bench – DTC OFF / IMMO OFF
Today, we’re diving into how to use ECUHELP KTFlash with a J2534 interface to Bench read/write Nissan Hitachi SH705519 ECU. In this tutorial, we’ll also walk through how to disable…
KTflash/KT200 Plus read write EDC16C39 on Bench, DTC Off
Today we use ECUHELP KT Flash to read and write EDC16C39 data on bench, and do DTC Off. 1. Take out the dongle with the protocol enabled (ECU/Bosch EDC16/ME9-series Module…
ECUHELP KT200Plus read/write/cks SID310 on Bench, DTC OFF
ECUHELP KT200-Plus is tested to work with SID310, read/write/checksum on bench, and do DTC OFF perfect. The main steps to follow: 1. Connect the KT200 Plus cable to the ECU…
ECUHELP KT200II R/W/ Cks BMW-320d F30 EDC17C50 on Bench
ECUHELP KT200II ECU Programmer is confirmed to program BMW-320d F30 EDC17C50, R/W BENCH MODE,Cks perfectly by KT200II. Look at the following images of using KT200II to connect EDC17C50 on bench…
Fix KT200II R/W Opel Delco E98 Full system “Error SilentKey”
ECUHELP KT200II user question: Opel AC Delco E98 Full system reading was ok But during writing at around 30% kt200ii stopped Now can’t even make id With Voltage: 13.8 –…
What Is the KTflash Dongle Used For? How to Use It?
This post is about what the ECUHELP KTflash Dongle is used for. How to use it after receiving it? Step 1. KTflash Software Download and one-click installation After receiving the…
How to fix KT200II Ford ME9.9 MPC5612 ERROR TEST EMPTY?
ECUHELP KT200II user feedback: read Ford ME9.9 MPC5612 okay, but when writing it, got message “ERROR TEST EMPTY” shown as the following image. Possible reason and solution: There is something…
KT200II R/W Chevrolet spark 1.0 Continental D52 Boot Mode
ECUHELP KT200II ECU Programmer Feedback: Car model: Chevrolet spark 1.0 Ecu: Continental D52 Read and write Boot mode Checksum by kt200II Connect the multifunction cable as follows: KT200II reads and…
ECUHELP KT200II R/W Maserati levante 3.0 EDC17C79 on Bench
ECUHELP KT200II ECU Programmer is tested to read/write Maserati levante 3.0 EDC17C79 on Bench, Checksum by kt2002 no problem. Connect the multifunction cable as follows: KT200II reads and writes use…
ECUHELP KT200II Read Write BMW EDC17CP09 on Bench
ECUHELP KT200II ECU Programmer is confirmed to work with BMW 740d 2009 EDC17CP09, R/W ok, chks ok. Bench mode. Connect the multifunction cable as follows: KT200II reads and writes using…