ECUHELP KT200II read write DCM7.1B PSA Boot Mode
ECUHELP KT200II ECU Programmer is tested 100% ok to read/write DCM7.1B PSA Boot Mode. Kit to use: – Multifunction cable – Bench Box V.2 READ AND WRITE ECU: With the…
edc17c49 Fiat ducato clone calculator with ECUHELP KT200II
This post is about how to use ECUHELP KT200II to clone a calculator for edc17c49 Fiat ducato. Simple instruction: It’s easy. Read flash and eprom from original ecu and save…
Fix KT200II Citroen EDC17C60 Bench Mode “ERROR Unlock Password”
If you’re working with a Citroen EDC17C60 ECU and encounter the “ERROR Unlock Password” message when trying to write Bench mode using the ECUHELP KT200II, don’t worry—this guide will walk…
KINGMA Odometer Correction Tool – Tested Vehicle Reports
KINGMA Odometer Correction Tool is a compact and versatile device designed for reading and changing mileage (kilometers) on a wide range of vehicles — including cars, motorcycles, engineering vehicles, and…
KINGMA Odometer Correction Tool Overview
KINGMA is a portable and versatile mileage correction tool designed to read and change mileage (KM) for a wide range of vehicles — including cars, motorcycles, engineering vehicles, and tractors,…
ECUHELP KT200II R/W DSG DQ250 02e Passat b6 2011 bench mode
ECUHELP KT200II ECU Programmer is confirmed to read/write / checksum DSG DQ250 02e Passat b6 2011 bench mode, Read flash ok, Read eeprom ok and Write flash ok. Look at…
ECUHELP KTprog Read/Write Infineon TC1767 Boot Mode
Today, we’re going to demonstrate how to read and write the Infineon TC1767 chip boot mode using the ECUHELP KTprog Chip Programmer. This guide covers the entire process—from setup to…
KTflash R/W Nissan SH705519 on Bench – DTC OFF / IMMO OFF
Today, we’re diving into how to use ECUHELP KTFlash with a J2534 interface to Bench read/write Nissan Hitachi SH705519 ECU. In this tutorial, we’ll also walk through how to disable…
KTflash/KT200 Plus read write EDC16C39 on Bench, DTC Off
Today we use ECUHELP KT Flash to read and write EDC16C39 data on bench, and do DTC Off. 1. Take out the dongle with the protocol enabled (ECU/Bosch EDC16/ME9-series Module…
ECUHELP KT200Plus read/write/cks SID310 on Bench, DTC OFF
ECUHELP KT200-Plus is tested to work with SID310, read/write/checksum on bench, and do DTC OFF perfect. The main steps to follow: 1. Connect the KT200 Plus cable to the ECU…