ECUHELP KT200II ECU Programmer has been tested and confirmed to successfully read and write the Delphi DCM3.5 ECU via OBD on a 2014 Citroen Jumpy 2.0 HDI 16V.

Test Vehicle and ECU Information
Vehicle: Citroen Jumpy
Year: 2014
Engine: 2.0 HDI 16V
ECU: Delphi DCM3.5
Operation Mode: OBD
Read: OK
Write: OK

ECUHELP KT200II OBD Read & Write Test
Connect the ECUHELP KT200II to the Citroen Jumpy through the OBD diagnostic socket and launch the corresponding ECU driver in the software.

Figure 1–3: Show the OBD reading and writing process of the Delphi DCM3.5 ECU using the ECUHELP KT200II.

Test Result
The test result is OK. The ECUHELP KT200II successfully reads and writes the Delphi DCM3.5 ECU on the 2014 Citroen Jumpy 2.0 HDI 16V via OBD.