ECUHELP KT200II ECU Programmer is confirmed to read/write Fiat Bosch EDC16C39 on Bench. Connect the multifunction cable as follows, use the Bench Box. For this ECU there are 5 different…

ECUHELP KT200II is confirmed to program Renault Clio III 1.5l dci 105 SID301 via OBD, read ok, write ok and checksum by the KT200II. Look at this image which shows…

ECUHELP KT200II ECU Programmer is tested to work with Opel Astra H GTC 1.9 CDTI 150ch Virginisation ECU EDC16C9, Read/write on bench. Connect the multifunction cable as follows, use the…

ECUHELP KT200II ECU Programmer is confirmed to read/write Skoda Fabia 1.6 tdi Simos PCR2.1 on Bench. Look at this image which shows KT200II is connected to Simos PCR2.1 on Bench.…

ECUHELP KT200II ECU Programmer is confirmed to program Polo gti aw 2019 2.0tsi Dsg dq250 mqb, read/write/checksum ok. Look at the images that show how the KT200II is connected to…

One user feedback: ECUHELP KT200II can’t connect to Audi MED 9.1.1, it showed “Turn the dashboard off and back on, then wait for 10s before proceeding.” (shown as the following…

ECUHELP KT200II ECU Programmer is tested to read and write Delco e38 via obd. Attach several images which show KT200II is connected to the car via obd, and write Delco…

ECUHELP KT200II ECU Programmer is confirmed to perfectly read/write Citroen Berlingo 2019 Md1cs003 on Bench, Cks by the tool. Use: – Multifunction cable – Bench Box V.2 Connect the multifunction…

ECUHELP KT200II ECU Programmer is confirmed to read/write Range Rover 3.0 2010 edc17cp11 on Bench. Look at the image to show the KT200II hardware connection on Bench and edc17cp11 reading…

ECUHELP KT200II ECU Programmer has been confirmed to successfully read and write ACM2.1 and MCM2.1 ECUs in Pinout Mode. Please take a look at the attached images (Figures 1-3) to…